远程服务器虚拟显示器配置方法选择_自建远程桌面服务器

大家好，又见面了，我是你们的朋友全栈君。如果您正在找激活码,请点击查看最新教程,关注关注公众号 “全栈程序员社区” 获取激活教程,可能之前旧版本教程已经失效.最新Idea2022.1教程亲测有效,一键激活。

Jetbrains全系列IDE使用 1年只要46元 售后保障 童叟无欺

• 注意事项

  1. 安装前首先配置好网络接口和teamviewer
  2. 安装完成后不再能通过外接显示器进入系统
  3. 如需外接显示器，首先移除/usr/share/X11/xorg.conf.d/xorg.conf文件

• 安装软件

  $ sudo apt-get install  xserver-xorg-core-hwe-18.04
  $ sudo apt-get install  xserver-xorg-video-dummy-hwe-18.04  --fix-missing
  

• 添加配置文件

  $ sudo vim /usr/share/X11/xorg.conf.d/xorg.conf
  
  Section "Device"
      Identifier  "Configured Video Device"
      Driver      "dummy"
  EndSection
  
  Section "Monitor"
      Identifier  "Configured Monitor"
      HorizSync 31.5-48.5
      VertRefresh 50-70
  EndSection
  
  Section "Screen"
      Identifier  "Default Screen"
      Monitor     "Configured Monitor"
      Device      "Configured Video Device"
      DefaultDepth 24
      SubSection "Display"
      Depth 24
      Modes "1920x1080"
      EndSubSection
  EndSection
  

  $ sudo vim /usr/share/X11/xorg.conf.d/dummy-1920x1080.conf
  
  Section "Monitor"
    Identifier "Monitor0"
    HorizSync 28.0-80.0
    VertRefresh 48.0-75.0
    # https://arachnoid.com/modelines/
    # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
    Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
  EndSection
  
  Section "Device"
    Identifier "Card0"
    Driver "dummy"
    VideoRam 256000
  EndSection
  
  Section "Screen"
    DefaultDepth 24
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
      Depth 24
      Modes "1920x1080_60.00"
    EndSubSection
  EndSection