Kali-linux :arping命令

Kali-linux :arping命令ARP协议是“AddressResolutionProtocol”(地址解析协议)的缩写。在同一以太网中,通过地址解析协议,源主机可以通过目的主机的IP地址获得目的主机的MAC地址。arping程序就是完成上述过程的程序。arping,用来向局域网内的其它主机发送ARP请求的指令,它可以用来测试局域网内的某个IP是否已被使用。root@pgg:/home/pgg#arping–helpARPing2.21,byThomasHabetsthomas@habets.seusage:

大家好,又见面了,我是你们的朋友全栈君。

ARP协议是“Address Resolution Protocol”(地址解析协议)的缩写。在同一以太网中,通过地址解析协议,源主机可以通过目的主机的IP地址获得目的主机的MAC地址。arping程序就是完成上述过程的程序。

arping,用来向局域网内的其它主机发送ARP请求的指令,它可以用来测试局域网内的某个IP是否已被使用。

root@pgg:/home/pgg# arping --help

ARPing 2.21, by Thomas Habets thomas@habets.se
usage: arping [ -0aAbdDeFpPqrRuUv ] [ -w ] [ -W ] [ -S <host/ip> ]
[ -T <host/ip ] [ -s ] [ -t ] [ -c ]
[ -C ] [ -i ] [ -m ] [ -g ]
[ -V ] [ -Q ] <host/ip/MAC | -B>

Options:

-0     Use this option to ping with source IP address 0.0.0.0. Use this
       when you haven't configured your interface yet.  Note that  this
       may  get  the  MAC-ping  unanswered.   This  is  an alias for -S
       0.0.0.0.
-a     Audiable ping.
-A     Only count addresses matching  requested  address  (This  *WILL*
       break  most things you do. Only useful if you are arpinging many
       hosts at once. See arping-scan-net.sh for an example).
-b     Like -0 but source broadcast source  address  (255.255.255.255).
       Note that this may get the arping unanswered since it's not nor-
       mal behavior for a host.
-B     Use instead of host if you want to address 255.255.255.255.
-c count
       Only send count requests.
-C count
       Only wait for this many replies, regardless of -c and -w.
-d     Find duplicate replies. Exit with 1 if there are answers from
       two different MAC addresses.
-D     Display answers as exclamation points and missing packets as dots.
-e     Like -a but beep when there is no reply.
-F     Don't try to be smart about the interface name.  (even  if  this
       switch is not given, -i overrides smartness)
-g group
       setgid() to this group instead of the nobody group.
-h     Displays a help message and exits.
-i interface
       Use the specified interface.
-m type
       Type of timestamp to use for incoming packets. Use -vv when
       pinging to list available ones.
-q     Does not display messages, except error messages.
-Q pri 802.1p priority to set. Should be used with 802.1Q (-V).
       Defaults to 0.
-r     Raw output: only the MAC/IP address is displayed for each reply.
-R     Raw output: Like -r but shows "the other one", can  be  combined
       with -r.
-s MAC Set source MAC address. You may need to use -p with this.
-S IP  Like  -b and -0 but with set source address.  Note that this may
       get the arping unanswered if the target does not have routing to
       the  IP.  If you don't own the IP you are using, you may need to
       turn on promiscious mode on the interface (with -p).  With  this
       switch  you can find out what IP-address a host has without tak-
       ing an IP-address yourself.
-t MAC Set target MAC address to use when pinging IP address.
-T IP  Use -T as target address when pinging MACs that won't respond to
       a broadcast ping but perhaps to a directed broadcast.
       Example:
       To check the address of MAC-A, use knowledge of MAC-B and  IP-B.
       $ arping -S <IP-B> -s <MAC-B> -p <MAC-A>
-p     Turn  on  promiscious  mode  on interface, use this if you don't
       "own" the MAC address you are using.
-P     Send ARP replies instead of requests. Useful with -U.
-u     Show index=received/sent instead  of  just  index=received  when
       pinging MACs.
-U     Send unsolicited ARP.
-v     Verbose output. Use twice for more messages.
-V num 802.1Q tag to add. Defaults to no VLAN tag.
-w sec Specify a timeout before ping exits regardless of how many packets have been sent or received.
-W sec Time to wait between pings.

Report bugs to: thomas@habets.se
Arping home page: http://www.habets.pp.se/synscan/
Development repo: http://github.com/ThomasHabets/arping

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 举报,一经查实,本站将立刻删除。

发布者:全栈程序员-用户IM,转载请注明出处:https://javaforall.cn/139698.html原文链接:https://javaforall.cn

【正版授权,激活自己账号】: Jetbrains全家桶Ide使用,1年售后保障,每天仅需1毛

【官方授权 正版激活】: 官方授权 正版激活 支持Jetbrains家族下所有IDE 使用个人JB账号...

(0)


相关推荐

  • python源码之家_python画图代码大全

    python源码之家_python画图代码大全广告关闭2017年12月,云+社区对外发布,从最开始的技术博客到现在拥有多个社区产品。未来,我们一起乘风破浪,创造无限可能。例如:想了解python做数据可视化的工作。我们可以从互联网找一些python做数据可视化的代码进行阅读,调试和迁移。这样做的好处,突出实用性。同时,我们在结合联想的学习方法,对所用到的可视化函数,做个更深入地了解和使用。我借用《数据科学和人工智能》这个公众号,分享一…

  • Dubbo负载均衡策略之 一致性哈希

    Dubbo负载均衡策略之 一致性哈希Dubbo负载均衡策略之一致性哈希1负载均衡在这里引用dubbo官网的一段话——LoadBalance中文意思为负载均衡,它的职责是将网络请求,或者其他形式的负载“均摊”到不同的机器上。避免集群中部分服务器压力过大,而另一些服务器比较空闲的情况。通过负载均衡,可以让每台服务器获取到适合自己处理能力的负载。在为高负载服务器分流的同时,还可以避免资源浪费,一举两得。负载均衡可分为软件负载均衡和硬件负载均衡。在我们日常开发中,一般很难接触到硬件负载均衡。但软件负载均衡还是可以接触到的,比如Nginx

  • bootstrap模态框modal使用remote动态加载内容,第二次加载显示相同内容解决办法…

    bootstrap模态框modal使用remote动态加载内容,第二次加载显示相同内容解决办法…

  • ▲ Android 自定义 Loading加载动画

    ▲ Android 自定义 Loading加载动画

  • The existing index has no NexusIndexer descriptor

    The existing index has no NexusIndexer descriptor

  • 【SpringBoot学习】5、SpringBoot 实现文件上传,图片上传并显示功能[通俗易懂]

    【SpringBoot学习】5、SpringBoot 实现文件上传,图片上传并显示功能[通俗易懂]我先看一下《颈椎病康复指南》再给大家说怎么实现的这两个功能,毕竟只是一个新手,解决这种复杂点的问题(相对而言),还是需要花费大量时间的,这篇文章花了两天的时间才实现的功能,现在就记录一下使用springboot怎么实现文件上传下载的。我这里使用的是springboot2.0.3,不需要导入相关jar包,2.x的版本已经整合进去了,直接使用即可。spring官网提供了springbo…

发表回复

您的电子邮箱地址不会被公开。

关注全栈程序员社区公众号