centos7纯手动安装kubernetes-v1.11版本

简介

本文章主要介绍如何通过使用官方提供的二进制包安装配置k8s集群

实验环境说明

实验架构

lab1: master 11.11.11.111
lab2: node 11.11.11.112
lab3: node 11.11.11.113
复制代码

实验使用的Vagrantfile

# -*- mode: ruby -*-
# vi: set ft=ruby :

ENV["LC_ALL"] = "en_US.UTF-8"

Vagrant.configure("2") do |config|
    (1..3).each do |i|
      config.vm.define "lab#{i}" do |node|
        node.vm.box = "centos-7.4-docker-17"
        node.ssh.insert_key = false
        node.vm.hostname = "lab#{i}"
        node.vm.network "private_network", ip: "11.11.11.11#{i}"
        node.vm.provision "shell",
          inline: "echo hello from node #{i}"
        node.vm.provider "virtualbox" do |v|
          v.cpus = 2
          v.customize ["modifyvm", :id, "--name", "lab#{i}", "--memory", "2048"]
        end
      end
    end
end
复制代码

安装

配置系统相关参数

如下操作在所有节点操作

# 临时禁用selinux
# 永久关闭 修改/etc/sysconfig/selinux文件设置
sed -i 's/SELINUX=permissive/SELINUX=disabled/' /etc/sysconfig/selinux
setenforce 0

# 临时关闭swap
# 永久关闭 注释/etc/fstab文件里swap相关的行
swapoff -a

# 开启forward
# Docker从1.13版本开始调整了默认的防火墙规则
# 禁用了iptables filter表中FOWARD链
# 这样会引起Kubernetes集群中跨Node的Pod无法通信

iptables -P FORWARD ACCEPT

# 配置转发相关参数，否则可能会出错
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
vm.swappiness=0
EOF
sysctl --system

# 加载ipvs相关内核模块
# 如果重新开机，需要重新加载
modprobe ip_vs
modprobe ip_vs_rr
modprobe ip_vs_wrr
modprobe ip_vs_sh
modprobe nf_conntrack_ipv4
lsmod | grep ip_vs

# 配置开启自加载
cat >/etc/modules-load.d/k8s-ipvs.conf<<EOF
ip_vs
ip_vs_rr
ip_vs_wrr
ip_vs_sh
nf_conntrack_ipv4
EOF
复制代码

配置hosts解析

如下操作在所有节点操作

cat >>/etc/hosts<<EOF
11.11.11.111 lab1
11.11.11.112 lab2
11.11.11.113 lab3
EOF
复制代码

安装配置docker

v1.11.0版本推荐使用docker v17.03, v1.11,v1.12,v1.13, 也可以使用，再高版本的docker可能无法正常使用。 测试发现17.09无法正常使用，不能使用资源限制(内存CPU)

如下操作在所有节点操作

安装docker

# 卸载安装指定版本docker-ce
yum remove -y docker-ce docker-ce-selinux container-selinux
yum install -y --setopt=obsoletes=0 \
docker-ce-17.03.1.ce-1.el7.centos \
docker-ce-selinux-17.03.1.ce-1.el7.centos
复制代码

启动docker

systemctl enable docker && systemctl restart docker
复制代码

安装CFSSL

只在lab1节点操作

# 下载
# 百度云链接：https://pan.baidu.com/s/1kgV40nwHy1IKnnLD6zH4cQ 密码：alyj
mkdir -pv /server/software/k8s
cd /server/software/k8s
yum install -y wget
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64

# 安装
mv cfssl-certinfo_linux-amd64 /usr/local/bin/cfssl-certinfo
mv cfssl_linux-amd64 /usr/local/bin/cfssl
mv cfssljson_linux-amd64 /usr/local/bin/cfssljson
chmod +x /usr/local/bin/cfssl*
复制代码

配置CA

只在lab1节点操作

此处的CA配置，后面配置etcd和k8s时都需要使用

mkdir -pv $HOME/ssl && cd $HOME/ssl
cat >ca-config.json<<EOF
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "87600h"
      }
    }
  }
}
EOF
复制代码

配置etcd集群

生成etcd-ca

只在lab1节点操作

# 写入配置
cat >etcd-ca-csr.json<<EOF
{
  "CN": "etcd",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "etcd",
      "OU": "Etcd Security"
    }
  ]
}
EOF

# 生成 etcd root ca
cfssl gencert -initca etcd-ca-csr.json | cfssljson -bare etcd-ca

cat >etcd-csr.json<<EOF
{
    "CN": "etcd",
    "hosts": [
      "127.0.0.1",
      "11.11.11.111",
      "11.11.11.112",
      "11.11.11.113"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
        {
            "C": "CN",
            "ST": "BeiJing",
            "L": "BeiJing",
            "O": "etcd",
            "OU": "Etcd Security"
        }
    ]
}
EOF

# 生成 etcd ca
cfssl gencert -ca=etcd-ca.pem -ca-key=etcd-ca-key.pem -config=ca-config.json \
-profile=kubernetes etcd-csr.json | cfssljson -bare etcd
mkdir -pv /etc/etcd/ssl
cp etcd*.pem /etc/etcd/ssl
ls /etc/etcd/ssl/etcd*.pem

# 复制到其他节点
cd /etc/etcd && tar cvzf etcd-ssl.tgz ssl/
scp /etc/etcd/etcd-ssl.tgz lab2:~/
scp /etc/etcd/etcd-ssl.tgz lab3:~/
ssh lab2 'mkdir -pv /etc/etcd && tar xf etcd-ssl.tgz -C /etc/etcd && ls -l /etc/etcd/ssl'
ssh lab3 'mkdir -pv /etc/etcd && tar xf etcd-ssl.tgz -C /etc/etcd && ls -l /etc/etcd/ssl'
复制代码

安装启动etcd

如下操作在所有节点操作

# 安装
# 百度云链接：https://pan.baidu.com/s/1IVHyMqiJrlq9gmbF49Ly3Q 密码：w5nx
mkdir -pv /server/software/k8s
cd /server/software/k8s
yum install -y wget
wget https://github.com/coreos/etcd/releases/download/v3.2.18/etcd-v3.2.18-linux-amd64.tar.gz
tar xf etcd-v3.2.18-linux-amd64.tar.gz
mv etcd-v3.2.18-linux-amd64 /usr/local/etcd-v3.2.18
ln -sv /usr/local/etcd-v3.2.18 /usr/local/etcd
cd /usr/local/etcd && mkdir bin && mv etcd etcdctl bin
/usr/local/etcd/bin/etcd --version
cd $HOME

# 配置启动脚本
export ETCD_NAME=$(hostname)
export INTERNAL_IP=$(hostname -i | awk '{print $NF}')
export ECTD_CLUSTER='lab1=https://11.11.11.111:2380,lab2=https://11.11.11.112:2380,lab3=https://11.11.11.113:2380'
mkdir -pv /data/etcd
cat > /etc/systemd/system/etcd.service <<EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=/data/etcd
EnvironmentFile=-/etc/etcd/etcd.conf
ExecStart=/usr/local/etcd/bin/etcd \\
  --name ${ETCD_NAME} \\
  --cert-file=/etc/etcd/ssl/etcd.pem \\
  --key-file=/etc/etcd/ssl/etcd-key.pem \\
  --peer-cert-file=/etc/etcd/ssl/etcd.pem \\
  --peer-key-file=/etc/etcd/ssl/etcd-key.pem \\
  --trusted-ca-file=/etc/etcd/ssl/etcd-ca.pem \\
  --peer-trusted-ca-file=/etc/etcd/ssl/etcd-ca.pem \\
  --initial-advertise-peer-urls https://${INTERNAL_IP}:2380 \\
  --listen-peer-urls https://${INTERNAL_IP}:2380 \\
  --listen-client-urls https://${INTERNAL_IP}:2379,https://127.0.0.1:2379 \\
  --advertise-client-urls https://${INTERNAL_IP}:2379 \\
  --initial-cluster-token my-etcd-token \\
  --initial-cluster $ECTD_CLUSTER \\
  --initial-cluster-state new \\
  --data-dir=/data/etcd
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

# 启动并设置开机启动
systemctl daemon-reload
systemctl start etcd
systemctl enable etcd
复制代码

查看etcd集群状态

/usr/local/etcd/bin/etcdctl --endpoints "https://127.0.0.1:2379" \
  --ca-file=/etc/etcd/ssl/etcd-ca.pem \
  --cert-file=/etc/etcd/ssl/etcd.pem \
  --key-file=/etc/etcd/ssl/etcd-key.pem \
  cluster-health
复制代码

生成k8s集群的CA

# 进入相关目录
cd $HOME/ssl
# 配置 root ca
cat >ca-csr.json<<EOF
{
"CN": "kubernetes",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "k8s",
"OU": "System"
}
],
"ca": {
"expiry": "87600h"
}
}
EOF
# 生成 root ca
cfssl gencert -initca ca-csr.json | cfssljson -bare ca
ls ca*.pem
# 配置 kube-apiserver ca
# 10.96.0.1 是 kube-apiserver 指定的 service-cluster-ip-range 网段的第一个IP
cat >kube-apiserver-csr.json<<EOF
{
"CN": "kube-apiserver",
"hosts": [
"127.0.0.1",
"11.11.11.111",
"11.11.11.112",
"11.11.11.113",
"10.96.0.1",
"kubernetes",
"kubernetes.default",
"kubernetes.default.svc",
"kubernetes.default.svc.cluster",
"kubernetes.default.svc.cluster.local"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "k8s",
"OU": "System"
}
]
}
EOF
# 生成 kube-apiserver ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver
ls kube-apiserver*.pem
# 配置 kube-controller-manager ca
cat >kube-controller-manager-csr.json<<EOF
{
"CN": "system:kube-controller-manager",
"hosts": [
"127.0.0.1",
"11.11.11.111",
"11.11.11.112",
"11.11.11.113"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "system:kube-controller-manager",
"OU": "System"
}
]
}
EOF
# 生成 kube-controller-manager ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
ls kube-controller-manager*.pem
# 配置 kube-scheduler ca
cat >kube-scheduler-csr.json<<EOF
{
"CN": "system:kube-scheduler",
"hosts": [
"127.0.0.1",
"11.11.11.111",
"11.11.11.112",
"11.11.11.113"
],
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "system:kube-scheduler",
"OU": "System"
}
]
}
EOF
# 生成 kube-scheduler ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler
ls kube-scheduler*.pem
# 配置 kube-proxy ca
cat >kube-proxy-csr.json<<EOF
{
"CN": "system:kube-proxy",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "system:kube-proxy",
"OU": "System"
}
]
}
EOF
# 生成 kube-proxy ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes kube-proxy-csr.json | cfssljson -bare kube-proxy
ls kube-proxy*.pem
# 配置 admin ca
cat >admin-csr.json<<EOF
{
"CN": "admin",
"key": {
"algo": "rsa",
"size": 2048
},
"names": [
{
"C": "CN",
"ST": "BeiJing",
"L": "BeiJing",
"O": "system:masters",
"OU": "System"
}
]
}
EOF
# 生成 admin ca
cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json \
-profile=kubernetes admin-csr.json | cfssljson -bare admin
ls admin*.pem
# 复制生成的ca
mkdir -pv /etc/kubernetes/pki
cp ca*.pem admin*.pem kube-proxy*.pem kube-scheduler*.pem kube-controller-manager*.pem kube-apiserver*.pem /etc/kubernetes/pki
cd /etc/kubernetes && tar cvzf pki.tgz pki/
scp /etc/kubernetes/pki.tgz lab2:~/
scp /etc/kubernetes/pki.tgz lab3:~/
ssh lab2 'mkdir -pv /etc/kubernetes && tar xf pki.tgz -C /etc/kubernetes && ls -l /etc/kubernetes/pki'
ssh lab3 'mkdir -pv /etc/kubernetes && tar xf pki.tgz -C /etc/kubernetes && ls -l /etc/kubernetes/pki'
cd $HOME
复制代码

安装k8s文件

# 下载文件
# 需要翻墙，如果不能翻墙使用如下链接下载
# 链接：https://pan.baidu.com/s/1OI9Q4BRp7jNJUmsA8IAkbA 密码：tnx5
cd /server/software/k8s
wget https://dl.k8s.io/v1.11.0/kubernetes-server-linux-amd64.tar.gz
tar xf kubernetes-server-linux-amd64.tar.gz
cd kubernetes/server/bin
mkdir -pv /usr/local/kubernetes-v1.11.0/bin
cp kube-apiserver kube-controller-manager kube-scheduler kube-proxy kubelet kubectl /usr/local/kubernetes-v1.11.0/bin
ln -sv /usr/local/kubernetes-v1.11.0 /usr/local/kubernetes
cp /usr/local/kubernetes/bin/kubectl /usr/local/bin/kubectl
kubectl version
cd $HOME
复制代码

生成kubeconfig

# 使用 TLS Bootstrapping 
export BOOTSTRAP_TOKEN=$(head -c 16 /dev/urandom | od -An -t x | tr -d ' ')
cat > /etc/kubernetes/token.csv <<EOF
${BOOTSTRAP_TOKEN},kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF
# 创建 kubelet bootstrapping kubeconfig
cd /etc/kubernetes
export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=${KUBE_APISERVER} \
--kubeconfig=kubelet-bootstrap.conf
kubectl config set-credentials kubelet-bootstrap \
--token=${BOOTSTRAP_TOKEN} \
--kubeconfig=kubelet-bootstrap.conf
kubectl config set-context default \
--cluster=kubernetes \
--user=kubelet-bootstrap \
--kubeconfig=kubelet-bootstrap.conf
kubectl config use-context default --kubeconfig=kubelet-bootstrap.conf
# 创建 kube-controller-manager kubeconfig
export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=${KUBE_APISERVER} \
--kubeconfig=kube-controller-manager.conf
kubectl config set-credentials kube-controller-manager \
--client-certificate=/etc/kubernetes/pki/kube-controller-manager.pem \
--client-key=/etc/kubernetes/pki/kube-controller-manager-key.pem \
--embed-certs=true \
--kubeconfig=kube-controller-manager.conf
kubectl config set-context default \
--cluster=kubernetes \
--user=kube-controller-manager \
--kubeconfig=kube-controller-manager.conf
kubectl config use-context default --kubeconfig=kube-controller-manager.conf
# 创建 kube-scheduler kubeconfig
export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=${KUBE_APISERVER} \
--kubeconfig=kube-scheduler.conf
kubectl config set-credentials kube-scheduler \
--client-certificate=/etc/kubernetes/pki/kube-scheduler.pem \
--client-key=/etc/kubernetes/pki/kube-scheduler-key.pem \
--embed-certs=true \
--kubeconfig=kube-scheduler.conf
kubectl config set-context default \
--cluster=kubernetes \
--user=kube-scheduler \
--kubeconfig=kube-scheduler.conf
kubectl config use-context default --kubeconfig=kube-scheduler.conf
# 创建 kube-proxy kubeconfig
export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=${KUBE_APISERVER} \
--kubeconfig=kube-proxy.conf
kubectl config set-credentials kube-proxy \
--client-certificate=/etc/kubernetes/pki/kube-proxy.pem \
--client-key=/etc/kubernetes/pki/kube-proxy-key.pem \
--embed-certs=true \
--kubeconfig=kube-proxy.conf
kubectl config set-context default \
--cluster=kubernetes \
--user=kube-proxy \
--kubeconfig=kube-proxy.conf
kubectl config use-context default --kubeconfig=kube-proxy.conf
# 创建 admin kubeconfig
export KUBE_APISERVER="https://11.11.11.111:6443"
kubectl config set-cluster kubernetes \
--certificate-authority=/etc/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=${KUBE_APISERVER} \
--kubeconfig=admin.conf
kubectl config set-credentials admin \
--client-certificate=/etc/kubernetes/pki/admin.pem \
--client-key=/etc/kubernetes/pki/admin-key.pem \
--embed-certs=true \
--kubeconfig=admin.conf
kubectl config set-context default \
--cluster=kubernetes \
--user=admin \
--kubeconfig=admin.conf
kubectl config use-context default --kubeconfig=admin.conf
# 把 kube-proxy.conf 复制到其他节点
scp kubelet-bootstrap.conf kube-proxy.conf lab2:/etc/kubernetes
scp kubelet-bootstrap.conf kube-proxy.conf lab3:/etc/kubernetes
cd $HOME
复制代码

配置master相关组件

只在lab1节点操作

配置启动kube-apiserver

# 复制 etcd ca
mkdir -pv /etc/kubernetes/pki/etcd
cd /etc/etcd/ssl
cp etcd-ca.pem etcd-key.pem etcd.pem /etc/kubernetes/pki/etcd
# 生成 service account key
openssl genrsa -out /etc/kubernetes/pki/sa.key 2048
openssl rsa -in /etc/kubernetes/pki/sa.key -pubout -out /etc/kubernetes/pki/sa.pub
ls /etc/kubernetes/pki/sa.*
cd $HOME
# 启动文件
cat >/etc/systemd/system/kube-apiserver.service<<EOF
[Unit]
Description=Kubernetes API Service
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/apiserver
ExecStart=/usr/local/kubernetes/bin/kube-apiserver \\
\$KUBE_LOGTOSTDERR \\
\$KUBE_LOG_LEVEL \\
\$KUBE_ETCD_ARGS \\
\$KUBE_API_ADDRESS \\
\$KUBE_SERVICE_ADDRESSES \\
\$KUBE_ADMISSION_CONTROL \\
\$KUBE_APISERVER_ARGS
Restart=on-failure
Type=notify
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
# 该配置文件同时被 kube-apiserver, kube-controller-manager
# kube-scheduler, kubelet, kube-proxy 使用
cat >/etc/kubernetes/config<<EOF
KUBE_LOGTOSTDERR="--logtostderr=true"
KUBE_LOG_LEVEL="--v=2"
EOF
cat >/etc/kubernetes/apiserver<<EOF
KUBE_API_ADDRESS="--advertise-address=11.11.11.111"
KUBE_ETCD_ARGS="--etcd-servers=https://11.11.11.111:2379,https://11.11.11.112:2379,https://11.11.11.113:2379 --etcd-cafile=/etc/kubernetes/pki/etcd/etcd-ca.pem --etcd-certfile=/etc/kubernetes/pki/etcd/etcd.pem --etcd-keyfile=/etc/kubernetes/pki/etcd/etcd-key.pem"
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.96.0.0/12"
KUBE_ADMISSION_CONTROL="--enable-admission-plugins=NamespaceLifecycle,LimitRanger,ServiceAccount,DefaultStorageClass,DefaultTolerationSeconds,MutatingAdmissionWebhook,ValidatingAdmissionWebhook,ResourceQuota"
KUBE_APISERVER_ARGS="--allow-privileged=true --authorization-mode=Node,RBAC --enable-bootstrap-token-auth=true --token-auth-file=/etc/kubernetes/token.csv --service-node-port-range=30000-32767 --tls-cert-file=/etc/kubernetes/pki/kube-apiserver.pem --tls-private-key-file=/etc/kubernetes/pki/kube-apiserver-key.pem --client-ca-file=/etc/kubernetes/pki/ca.pem --service-account-key-file=/etc/kubernetes/pki/sa.pub --enable-swagger-ui=true --secure-port=6443 --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --anonymous-auth=false --kubelet-client-certificate=/etc/kubernetes/pki/admin.pem --kubelet-client-key=/etc/kubernetes/pki/admin-key.pem"
EOF
# 启动
systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
systemctl status kube-apiserver
# 浏览器访问测试
https://11.11.11.111:6443/swaggerapi
复制代码

配置启动kube-controller-manager

# 启动文件
cat >/etc/systemd/system/kube-controller-manager.service<<EOF
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/controller-manager
ExecStart=/usr/local/kubernetes/bin/kube-controller-manager \\
\$KUBE_LOGTOSTDERR \\
\$KUBE_LOG_LEVEL \\
\$KUBECONFIG \\
\$KUBE_CONTROLLER_MANAGER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
cat >/etc/kubernetes/controller-manager<<EOF
KUBECONFIG="--kubeconfig=/etc/kubernetes/kube-controller-manager.conf"
KUBE_CONTROLLER_MANAGER_ARGS="--address=127.0.0.1 --cluster-cidr=10.244.0.0/16 --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/pki/ca.pem --cluster-signing-key-file=/etc/kubernetes/pki/ca-key.pem --service-account-private-key-file=/etc/kubernetes/pki/sa.key --root-ca-file=/etc/kubernetes/pki/ca.pem --leader-elect=true --use-service-account-credentials=true --node-monitor-grace-period=10s --pod-eviction-timeout=10s --allocate-node-cidrs=true --controllers=*,bootstrapsigner,tokencleaner"
EOF
# 启动
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager
systemctl status kube-controller-manager
复制代码

配置启动kube-scheduler

cat >/etc/systemd/system/kube-scheduler.service<<EOF
[Unit]
Description=Kubernetes Scheduler Plugin
Documentation=https://github.com/kubernetes/kubernetes
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/scheduler
ExecStart=/usr/local/kubernetes/bin/kube-scheduler \\
\$KUBE_LOGTOSTDERR \\
\$KUBE_LOG_LEVEL \\
\$KUBECONFIG \\
\$KUBE_SCHEDULER_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
cat >/etc/kubernetes/scheduler<<EOF
KUBECONFIG="--kubeconfig=/etc/kubernetes/kube-scheduler.conf"
KUBE_SCHEDULER_ARGS="--leader-elect=true --address=127.0.0.1"
EOF
# 启动
systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler
systemctl status kube-scheduler
复制代码

配置kubectl使用

rm -rf $HOME/.kube
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
kubectl get no
复制代码

查看组件状态

kubectl get componentstatuses
复制代码

配置kubelet使用bootstrap

# 将 bootstrap token 文件中的 kubelet-bootstrap 用户赋予 system:node-bootstrapper cluster 角色
kubectl create clusterrolebinding kubelet-bootstrap \
--clusterrole=system:node-bootstrapper \
--user=kubelet-bootstrap
复制代码

配置node相关组件

如下操作在所有节点操作

安装cni

# 安装 cni
# 百度云链接：https://pan.baidu.com/s/1-PputObLs5jouXLnuBCI6Q 密码：tzqm
cd /server/software/k8s
wget https://github.com/containernetworking/plugins/releases/download/v0.7.1/cni-plugins-amd64-v0.7.1.tgz
mkdir -pv /opt/cni/bin
tar xf cni-plugins-amd64-v0.7.1.tgz -C /opt/cni/bin
ls -l /opt/cni/bin
cd $HOME
复制代码

配置启动kubelet

# 启动文件
mkdir -pv /data/kubelet
cat >/etc/systemd/system/kubelet.service<<EOF
[Unit]
Description=Kubernetes Kubelet Server
Documentation=https://github.com/kubernetes/kubernetes
After=docker.service
Requires=docker.service
[Service]
WorkingDirectory=/data/kubelet
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/kubelet
ExecStart=/usr/local/kubernetes/bin/kubelet \\
\$KUBE_LOGTOSTDERR \\
\$KUBE_LOG_LEVEL \\
\$KUBELET_CONFIG \\
\$KUBELET_HOSTNAME \\
\$KUBELET_POD_INFRA_CONTAINER \\
\$KUBELET_ARGS
Restart=on-failure
[Install]
WantedBy=multi-user.target
EOF
cat >/etc/kubernetes/config<<EOF
KUBE_LOGTOSTDERR="--logtostderr=true"
KUBE_LOG_LEVEL="--v=2"
EOF
# 注意修改相关ip
cat >/etc/kubernetes/kubelet<<EOF
KUBELET_HOSTNAME="--hostname-override=11.11.11.111"
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.1"
KUBELET_CONFIG="--config=/etc/kubernetes/kubelet-config.yml"
KUBELET_ARGS="--bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.conf --kubeconfig=/etc/kubernetes/kubelet.conf --cert-dir=/etc/kubernetes/pki --network-plugin=cni --cni-bin-dir=/opt/cni/bin --cni-conf-dir=/etc/cni/net.d"
EOF
# 注意修改相关ip
# lab1 lab2 lab3 使用各自ip
cat >/etc/kubernetes/kubelet-config.yml<<EOF
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
address: 11.11.11.111
port: 10250
cgroupDriver: cgroupfs
clusterDNS:
- 10.96.0.10
clusterDomain: cluster.local.
hairpinMode: promiscuous-bridge
serializeImagePulls: false
authentication:
x509:
clientCAFile: /etc/kubernetes/pki/ca.pem
EOF
# 启动
systemctl daemon-reload
systemctl enable kubelet
systemctl start kubelet
systemctl status kubelet
复制代码

通过证书请求

# 在配置了kubectl的节点上执行如下操作
# 查看
kubectl get csr
# 通过
kubectl certificate approve node-csr-Yiiv675wUCvQl3HH11jDr0cC9p3kbrXWrxvG3EjWGoE
# 查看节点
# 此时节点状态为 NotReady
kubectl get nodes
# 在node节点查看生成的文件
ls -l /etc/kubernetes/kubelet.conf
ls -l /etc/kubernetes/pki/kubelet*
复制代码

配置启动kube-proxy

# 安装
yum install -y conntrack-tools
# 启动文件
cat >/etc/systemd/system/kube-proxy.service<<EOF
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target
[Service]
EnvironmentFile=-/etc/kubernetes/config
EnvironmentFile=-/etc/kubernetes/proxy
ExecStart=/usr/local/kubernetes/bin/kube-proxy \\
\$KUBE_LOGTOSTDERR \\
\$KUBE_LOG_LEVEL \\
\$KUBECONFIG \\
\$KUBE_PROXY_ARGS
Restart=on-failure
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
# 注意修改相关ip
# lab1 lab2 lab3 使用各自ip
# 由于 1.11.0 ipvs 在centos7上有bug无法正常使用
# 实验使用 iptables 模式
# 以后版本可以使用 ipvs 模式
cat >/etc/kubernetes/proxy<<EOF
KUBECONFIG="--kubeconfig=/etc/kubernetes/kube-proxy.conf"
KUBE_PROXY_ARGS="--bind-address=11.11.11.111 --proxy-mode=iptables --hostname-override=11.11.11.111 --cluster-cidr=10.244.0.0/16"
EOF
# 启动
systemctl daemon-reload
systemctl enable kube-proxy
systemctl start kube-proxy
systemctl status kube-proxy
复制代码

设置集群角色

# 设置 lab1 为 master
kubectl label nodes 11.11.11.111 node-role.kubernetes.io/master=
# 设置 lab2 lab3 为 node
kubectl label nodes 11.11.11.112 node-role.kubernetes.io/node=
kubectl label nodes 11.11.11.113 node-role.kubernetes.io/node=
# 设置 master 一般情况下不接受负载
kubectl taint nodes 11.11.11.111 node-role.kubernetes.io/master=true:NoSchedule
# 查看节点
# 此时节点状态为 NotReady
kubectl get no
复制代码

配置使用flannel网络

在lab1操作

# 下载配置
mkdir flannel && cd flannel
wget https://raw.githubusercontent.com/coreos/flannel/v0.10.0/Documentation/kube-flannel.yml
# 修改配置
# 此处的ip配置要与上面kubeadm的pod-network一致
net-conf.json: |
{
"Network": "10.244.0.0/16",
"Backend": {
"Type": "vxlan"
}
}
# 修改镜像
image: registry.cn-shanghai.aliyuncs.com/gcr-k8s/flannel:v0.10.0-amd64
# 如果Node有多个网卡的话，参考flannel issues 39701，
# https://github.com/kubernetes/kubernetes/issues/39701
# 目前需要在kube-flannel.yml中使用--iface参数指定集群主机内网网卡的名称，
# 否则可能会出现dns无法解析。容器无法通信的情况，需要将kube-flannel.yml下载到本地，
# flanneld启动参数加上--iface=<iface-name>
containers:
- name: kube-flannel
image: registry.cn-shanghai.aliyuncs.com/gcr-k8s/flannel:v0.10.0-amd64
command:
- /opt/bin/flanneld
args:
- --ip-masq
- --kube-subnet-mgr
- --iface=eth1
# 启动
kubectl apply -f kube-flannel.yml
# 查看
kubectl get pods -n kube-system
kubectl get svc -n kube-system
# 查看节点状态
# 当 flannel pod 全部启动之后，节点状态为 Ready
kubectl get no
复制代码

配置使用coredns

在lab1操作

# 安装
# 10.96.0.10 kubelet中配置的dns
cd $HOME && mkdir coredns && cd coredns
wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/deploy.sh
chmod +x deploy.sh
./deploy.sh -i 10.96.0.10 > coredns.yml
kubectl apply -f coredns.yml
# 查看
kubectl get pods -n kube-system
kubectl get svc -n kube-system
复制代码

测试

启动

kubectl run nginx --replicas=2 --image=nginx:alpine --port=80
kubectl expose deployment nginx --type=NodePort --name=example-service-nodeport
kubectl expose deployment nginx --name=example-service
kubectl scale --replicas=3 deployment/nginx
复制代码

查看状态

kubectl get deploy -o wide
kubectl get pods -o wide
kubectl get svc -o wide
kubectl describe svc example-service
复制代码

DNS解析

kubectl run curl --image=radial/busyboxplus:curl -i --tty
nslookup kubernetes
nslookup example-service
curl example-service
复制代码

访问测试

# 10.96.59.56 为查看svc时获取到的clusterip
curl "10.107.91.153:80"
# 32223 为查看svc时获取到的 nodeport
http://11.11.11.111:32223/
http://11.11.11.112:32223/
http://11.11.11.113:32223/
复制代码

清理

kubectl delete svc example-service example-service-nodeport
kubectl delete deploy nginx curl
复制代码

参考文档

• jimmysong.io/kubernetes-…
• zhangguanzhang.github.io/2018/05/05/…
• kubernetes.io/docs/concep…
• kairen.github.io/2018/04/05/…
• www.maogx.win/posts/7/
• kubernetes.io/docs/concep…
• kubernetes-v1-4.github.io/docs/user-g…
• kubernetes.io/docs/tasks/…
• github.com/gjmzj/kubea…