CentOS 5.8 Zimbra邮件系统安装与配置

CentOS 5.8 Zimbra邮件系统安装与配置

时间 2013-01-02 19:30:25  运维工作奋斗-51CTO技术博客 

  一、 系统环境

拓朴图:

CentOS 5.8 Zimbra邮件系统安装与配置

 

系     

域    名 

服务器 

客户端 

CentOS 5.8_64bit 

mail.zimbra.org

10.10.10.254 

10.10.10.110 

二、基本配置

1 、配置 IP

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

IPADDR=10.10.10.254

NETMASK=255.255.255.0

:wq

[root@localhost ~]# service network restart

2 、配置 DNS 文件

[root@localhost ~]# vim /etc/resolv.conf

nameserver 10.10.10.254

3 、配置 hosts 文件

[root@localhost ~]# vim /etc/hosts

127.0.0.1       localhost.localdomain localhost

10.10.10.254    mail.zimbra.org

4 、配置主机名: mail.zimbra.org

[root@localhost ~]# vim /etc/sysconfig/network

HOSTNAME=mail.zimbra.org

:wq   保存

[root@localhost ~]# hostname mail.zimbra.org

断开终端,再次连接,这样就需要重新启动系统: ctrl+d

[root@mail ~]# hostname

mail.zimbra.org

5  SELinux 关闭、 LINUX 关闭防火墙

SELinux 关闭

1. 永久方法      需要重启服务器

修改 /etc/selinux/config 文件中设置 SELINUX=disabled  ,然后重启服务器。

2. 临时方法      设置系统参数

使用命令 setenforce 0

LINUX 关闭防火墙

1. 重启后永久性生效:

开启: chkconfig iptables on

关闭: chkconfig iptables off

2 . 即时生效,重启后失效:

开启: service iptables start

关闭: service iptables stop

 

三、安装所需依赖 rpm 

[root@mail ~]# yum install libtool-ltdl compat-libstdc++-33 sysstat

四、安装 bind(DNS)

[root@mail ~]# yum install bind-libs ypbind bind-chroot bind bind-utils caching-nameserver

1 、配置 named 文件

[root@mail ~]# cd /var/named/chroot/etc/

[root@mail etc]# cp -p named.caching-nameserver.conf named.conf

[root@mail etc]# cp named.conf named.confbak

[root@mail etc]# vim named.conf

修改:

行数

 15         listen-on port 53 {  any ; };

 27         allow-query     {  any ; };

 28         allow-query-cache {  any ; };

 37         match-clients      {  any ; };

 38         match-destinations {  any ; };

:wq

[root@Zmail etc]# cp named.rfc1912.zones named.rfc1912.zonesbak

[root@mail etc]# vim named.rfc1912.zones

复制修改以下内容:

 21 zone “localhost” IN {

 22         type master;

 23         file “localhost.zone”;

 24         allow-update { none; };

 25 };

  修改如下:

 27 zone ” zimbra.org ” IN {

 28         type master;

 29         file ” zimbra.org.zone “;

 30         allow-update { none; };

 31 };

:wq

2 、进入 named 目录

[root@mail etc]# cd ../var/named/

[root@mail named]# pwd

/var/named/chroot/var/named

3 、创建 zone 文件

[root@mail named]# cp -p localhost.zone zimbra.org.zone

[root@mail named]# cp zimbra.org.zone zimbra.org.zonebak

[root@mail named]# vim zimbra.org.zone

$TTL    86400

@               IN SOA   mx.zimbra.org.        root (

                                        42              ; serial (d. adams)

                                        3H              ; refresh

                                        15M             ; retry

                                        1W              ; expiry

                                        1D )            ; minimum

@               IN NS           mx.zimbra.org.

@               IN A            10.10.10.254

mx              IN A            10.10.10.254

mail            IN A            10.10.10.254

@               IN MX 10        mail

:wq

4 、测试 DNS

[root@mail named]# nslookup

 set type=mx

 zimbra.org

Server:         202.96.128.166

Address:        202.96.128.166#53

Non-authoritative answer:

zimbra.org      mail exchanger = 10 net109.nonsolocomputer.net.

Authoritative answers can be found from:

zimbra.org      nameserver = ns2.dominiofaidate.com.

zimbra.org      nameserver = ns1.dominiofaidate.com.

5 、启动 named

[root@mail named]# service named restart

[root@Zimail named]# chkconfig named on

五、关闭 sendmail, 并不随机启动或者卸载

[root@mail named]# service sendmail stop

[root@mail named]# chkconfig sendmail off

六、安装 zimbra

下载: http://files.zimbra.com/downloads/7.1.3_GA/zcs-7.1.3_GA_3346.RHEL5_64.20110928134520.tgz

[root@mail ~]# tar -zxvf zcs-7.1.3_GA_3346.RHEL5_64.20110928134520.tgz -C /usr/local/src/

[root@mail ~]# cd /usr/local/src/

[root@mail src]# cd zcs-7.1.3_GA_3346.RHEL5_64.20110928134520/

[root@mail zcs-7.1.3_GA_3346.RHEL5_64.20110928134520]# ./install.sh –platform-override

Operations logged to /tmp/install.log.29062

Checking for existing installation…

    zimbra-ldap…NOT FOUND

    。。。。。。。。(略)

    zimbra-core…NOT FOUND

PLEASE READ THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE.

ZIMBRA, INC. (“ZIMBRA”) WILL ONLY LICENSE THIS SOFTWARE TO YOU IF YOU

FIRST ACCEPT THE TERMS OF THIS AGREEMENT. BY DOWNLOADING OR INSTALLING

THE SOFTWARE, OR USING THE PRODUCT, YOU ARE CONSENTING TO BE BOUND BY

THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS

AGREEMENT, THEN DO NOT DOWNLOAD, INSTALL OR USE THE PRODUCT.

License Terms for the Zimbra Collaboration Suite:

  http://www.zimbra.com/license/zimbra_public_eula_2.1.html

Do you agree with the terms of the software license agreement? [N]  y

Checking for prerequisites…

     FOUND: NPTL

。。。。。。。。(略)

Found zimbra-proxy

Select the packages to install

Install zimbra-ldap [Y]  y

Install zimbra-logger [Y]  y

Install zimbra-mta [Y]  y

Install zimbra-snmp [Y]  y

Install zimbra-store [Y]  y

Install zimbra-apache [Y]  y

Install zimbra-spell [Y]  y

Install zimbra-memcached [N]  y

Install zimbra-proxy [N]  n

Checking required space for zimbra-core

checking space for zimbra-store

Installing:

    zimbra-core

     。。。。。。。。(略)

    zimbra-spell

    zimbra-memcached

You appear to be installing packages on a platform different

than the platform for which they were built.

This platform is CentOS5_64

Packages found: RHEL5_64

This may or may not work.

Using packages for a platform in which they were not designed for

may result in an installation that is NOT usable. Your support

options may be limited if you choose to continue.

Install anyway? [N]  y

The system will be modified.  Continue? [N]  y

Removing /opt/zimbra

Removing zimbra crontab entry…done.

done.

。。。。。。。。(略) .

Finished removing Zimbra Collaboration Suite.

Installing packages

    zimbra-core……zimbra-core-7.1.3_GA_3346.RHEL5_64-20110928134520.x86_64.rpm…done

    。。。。。。。。(略)

Operations logged to /tmp/zmsetup.01022013-145607.log

Installing LDAP configuration database…done.

Setting defaults…

 

DNS ERROR resolving MX for mail.zimbra.org

It is suggested that the domain name have an MX record configured in DNS

Change domain name? [Yes]  y

Create domain: [mail.zimbra.org]  zimbra.org     # 设置域名

        MX: mail.zimbra.org (10.10.10.254)

        Interface: 10.10.10.254

        Interface: 127.0.0.1

done.

Checking for port conflicts

Main menu

   1) Common Configuration:                                                 

   2) zimbra-ldap:                             Enabled                      

   3) zimbra-store:                            Enabled                      

        +Create Admin User:                    yes                          

        +Admin user to create:                 admin@zimbra.org             

******* +Admin Password                      UNSET                         

        +Anti-virus quarantine user:           virus-quarantine.kqhru87ko@zimbra.org

        +Enable automated spam training:       yes                          

        +Spam training user:                   spam.0yxtjbeb@zimbra.org     

        +Non-spam(Ham) training user:          ham.gl0urd64@zimbra.org      

        +SMTP host:                          mail.zimbra.org              

        +Web server HTTP port:                 80                           

        +Web server HTTPS port:                443                          

        +Web server mode:                    http                         

        +IMAP server port:                     143                          

        +IMAP server SSL port:                  993                           

        +POP server port:                      110                          

        +POP server SSL port:                   995                          

        +Use spell check server:                 yes                           

        +Spell server URL:                      http://mail.zimbra.org:7780/aspell.php

        +Configure for use with mail proxy:        FALSE                        

        +Configure for use with web proxy:        FALSE                        

        +Enable version update checks:           TRUE                         

        +Enable version update notifications:      TRUE                         

        +Version update notification email:        admin@zimbra.org             

        +Version update source email:            admin@zimbra.org              

   4) zimbra-mta:                              Enabled                      

   5) zimbra-snmp:                             Enabled                      

   6) zimbra-logger:                            Enabled                      

   7) zimbra-spell:                              Enabled                      

   8) Default Class of Service Configuration:                               

   r) Start servers after configuration               yes                          

   s) Save config to file                                                   

   x) Expand menu                                                           

   q) Quit                                    

Address unconfigured (**) items  (? – help)  3   # 设置网页管理端 admin 的登录密码

Store configuration

   1) Status:                              Enabled                      

   2) Create Admin User:                    yes                          

   3) Admin user to create:                   admin@zimbra.org             

** 4) Admin Password                       UNSET                        

   5) Anti-virus quarantine user:              virus-quarantine.kqhru87ko@zimbra.org

   6) Enable automated spam training:          yes                           

   7) Spam training user:                      spam.0yxtjbeb@zimbra.org     

   8) Non-spam(Ham) training user:             ham.gl0urd64@zimbra.org      

   9) SMTP host:                            mail.zimbra.org              

  10) Web server HTTP port:                   80                           

  11) Web server HTTPS port:                  443                          

  12) Web server mode:                      http                         

  13) IMAP server port:                      143                          

  14) IMAP server SSL port:                   993                          

  15) POP server port:                       110                          

  16) POP server SSL port:                    995                           

  17) Use spell check server:                  yes                          

  18) Spell server URL:                       http://mail.zimbra.org:7780/aspell.php

  19) Configure for use with mail proxy:         FALSE                         

  20) Configure for use with web proxy:         FALSE                        

  21) Enable version update checks:            TRUE                         

  22) Enable version update notifications:       TRUE                         

  23) Version update notification email:         admin@zimbra.org             

  24) Version update source email:             admin@zimbra.org              

Select, or ‘r’ for previous menu [r]  4     # 设置后台管理密码

Password for admin@zimbra.org (min 6 characters): [9XL2caGG]  123456   # 密码为:123456

Store configuration

   1) Status:                               Enabled                      

   2) Create Admin User:                     yes                          

   3) Admin user to create:                   admin@zimbra.org             

   4) Admin Password                       set                          

   5) Anti-virus quarantine user:              virus-quarantine.kqhru87ko@zimbra.org

   6) Enable automated spam training:          yes                          

   7) Spam training user:                      spam.0yxtjbeb@zimbra.org     

   8) Non-spam(Ham) training user:             ham.gl0urd64@zimbra.org      

   9) SMTP host:                               mail.zimbra.org              

  10) Web server HTTP port:                    80                           

  11) Web server HTTPS port:                   443                          

  12) Web server mode:                         http                         

  13) IMAP server port:                        143                           

  14) IMAP server SSL port:                    993                          

  15) POP server port:                         110                          

  16) POP server SSL port:                     995                          

  17) Use spell check server:                  yes                          

  18) Spell server URL:                        http://mail.zimbra.org:7780/aspell.php

  19) Configure for use with mail proxy:       FALSE                        

  20) Configure for use with web proxy:        FALSE                        

  21) Enable version update checks:            TRUE                         

  22) Enable version update notifications:     TRUE                         

  23) Version update notification email:       admin@zimbra.org             

  24) Version update source email:             admin@zimbra.org             

Select, or ‘r’ for previous menu [r]  r   # 返回上一层页面

Main menu

   1) Common Configuration:                                                 

   2) zimbra-ldap:                             Enabled                      

   3) zimbra-store:                            Enabled                      

   4) zimbra-mta:                              Enabled                      

   5) zimbra-snmp:                             Enabled                      

   6) zimbra-logger:                           Enabled                      

   7) zimbra-spell:                            Enabled                      

   8) Default Class of Service Configuration:                                

   r) Start servers after configuration            yes                          

   s) Save config to file                                                   

   x) Expand menu                                                           

   q) Quit                                    

*** CONFIGURATION COMPLETE – press ‘a’ to apply

Select from menu, or press ‘a’ to apply config (? – help)  a    # 输入 ”a” 应用配置

Save configuration data to a file? [Yes]  y

Save config in file: [/opt/zimbra/config.4354]  y

Saving config in y…done.

The system will be modified – continue? [No]  y

Operations logged to /tmp/zmsetup.01022013-145607.log

Setting local config values…done.

。。。。。。。。(略)

Checking for default IM conference room…not present.

Initializing default IM conference room…done.

Setting up syslog.conf…done.

You have the option of notifying Zimbra of your installation.

This helps us to track the uptake of the Zimbra Collaboration Suite.

The only information that will be transmitted is:

        The VERSION of zcs installed (7.1.3_GA_3346_CentOS5_64)

        The ADMIN EMAIL ADDRESS created (admin@zimbra.org)

Notify Zimbra of your installation? [Yes]  no

Notification skipped

Starting servers…done.

Installing common zimlets…

        com_zimbra_attachcontacts…done.

         。。。。。。。。(略)

Setting up zimbra crontab…done.

Moving /tmp/zmsetup.01022013-145607.log to /opt/zimbra/log

Configuration complete – press return to exit

安装完成,按任意键退出。 

七、验证

1 、登录后台管理

https://mail.zimbra.org:7071  邮件后台管理  ( 帐户: admin ,密码: 123456 (安装时的设置) )

CentOS 5.8 Zimbra邮件系统安装与配置

服务正常启动:

CentOS 5.8 Zimbra邮件系统安装与配置

2 、创建用户

地址 —– 新建:帐户

CentOS 5.8 Zimbra邮件系统安装与配置

CentOS 5.8 Zimbra邮件系统安装与配置

CentOS 5.8 Zimbra邮件系统安装与配置

下一步 (略)

CentOS 5.8 Zimbra邮件系统安装与配置

CentOS 5.8 Zimbra邮件系统安装与配置

CentOS 5.8 Zimbra邮件系统安装与配置

完成。

3 、登录客户端

http://mail.zimbra.org  

在上面的管理界面我建立了一个名字为 yanghw 的邮箱账号,用这个账号登录邮箱客户端:

CentOS 5.8 Zimbra邮件系统安装与配置

之前 yanghw 的账号给 user1 发了一份邮件:

CentOS 5.8 Zimbra邮件系统安装与配置

User1 收到来自 yanghw 的邮件:表明收发邮件成功!

CentOS 5.8 Zimbra邮件系统安装与配置

zimbra 邮件系统搭建完成!!!

版权声明:本文内容由互联网用户自发贡献,该文观点仅代表作者本人。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌侵权/违法违规的内容, 请发送邮件至 举报,一经查实,本站将立刻删除。

发布者:全栈程序员-用户IM,转载请注明出处:https://javaforall.cn/100450.html原文链接:https://javaforall.cn

【正版授权,激活自己账号】: Jetbrains全家桶Ide使用,1年售后保障,每天仅需1毛

【官方授权 正版激活】: 官方授权 正版激活 支持Jetbrains家族下所有IDE 使用个人JB账号...

(0)


相关推荐

  • go语言实现最小区块链教程7-网络「建议收藏」

    go语言实现最小区块链教程7-网络「建议收藏」1介绍Introduction到目前为止,我们构建了一个含有以下特征的区块链:匿名、安全、以及随机产生地址;区块链数据存储;PoW系统;可靠的交易记录存储方式。这些特征都非常关键,但是这还不够。能够让这些特征升华的,并且让加密货币变得可能的,是网络(network)。这样的区块链实现如果只能在单一的电脑上面运行有什么用?这些基础加密特性有什么有,如果仅有一个用户?网络让这些机制工作并发挥作用。…

  • XLSTransformer导出多sheet页

    XLSTransformer导出多sheet页https://blog.csdn.net/z69183787/article/details/51407171?utm_source=app&app_version=4.17.0&code=app_1562916241&uLinkId=usr1mkqgl919blen

  • 【TensorFlow】Windows10 64 位下安装 TensorFlow – 官方原生支持

    之前写过一篇在ubuntu下安装TensorFlow的教程,那个时候TensorFlow官方还不支持Windows系统,虽然可以通过其他方法安装,但是终究不是原生的,而且安装过程繁琐易错。好消息是,Google官方在11月29号的开发者博客中宣布新的版本(0.12)将增加对Windows的支持,我11月30号知道的,立马就安装试了试,安装过程非常简单,不过也有一些需要手动调整。…

  • 如何将本地文件通过终端上传到linux服务器 /服务器/阿里云「建议收藏」

    如何将本地文件通过终端上传到linux服务器 /服务器/阿里云「建议收藏」scp-P端口c://xxxx.txtuser@ip:/home/root注意:-P大写-i公钥(我是将文件上传到阿里云)(1)在本地的终端下,而不是在服务器上。在本地的终端上才能将本地的文件拷入服务器。(2)scp-rlocalfile.txtusername@192.168.0.1:/home/username/其中,1)scp是命令,-r是参…

  • vue3数据劫持_vue实现keepalive

    vue3数据劫持_vue实现keepalive模仿vue的数据劫持,实现mvvm

  • velocity定义_velocity模板

    velocity定义_velocity模板文章目录基本用法导入依赖1.基本用法1.1注释1.2替换变量1.3不解析,原文输出1.4调用对象方法指令setifelse基本用法导入依赖<dependency> <groupId>org.apache.velocity</groupId><artifactId>velocity</artifactId><version>1.7</version></dependency&

    2022年10月19日

发表回复

您的电子邮箱地址不会被公开。

关注全栈程序员社区公众号